How clean is your house? Well, the average American cleans seven times a month, so how does your household fare? In this era, keeping on top of cleaning chores can be a challenge for many of us.
Bathroom cleaning is a task that few of us enjoy, but it has to be done to keep a clean and healthy environment.
However, many people make common cleaning mistakes when cleaning the bathroom, leaving your bathroom just as dirty as before. This article will outline eight common bathroom cleaning errors and how to avoid them.
1. Using the Wrong Cleaning Tools
The wrong cleaning tools will slow you down and leave your bathroom less than perfect. So always equip yourself with the correct cleaning supplies before you start work.
On your list should be the following:
- A toilet brush
- A mop for tiled floors
- A scrub brush
- A microfiber cloth
- Cleaning solution
- Rubber gloves
Regularly replace your cleaning tools if they start to look worn.
You’ll add old dirt back into a bathroom if you don’t. And soak cloths and sponges thoroughly in warm water after use to ensure you clean off any remaining cleaning products.
2. Not Cleaning Regularly
If you don’t regularly clean your bathroom, it could become a breeding ground for bacteria and germs, leading to foul odors and an unhygienic environment.
Additionally, if left uncleaned for too long, the bathroom surfaces can develop mold and mildew, especially in areas that retain moisture, such as around the sink, shower, and bath.
The best approach for your bathroom cleaning routine is to create a cleaning schedule and stick to it.
Set aside time once a week to thoroughly clean the bathroom, including wiping down surfaces and scrubbing sinks, showers, and tubs. Sticking to the same time and day each week will help it to become a habit.
3. Not Cleaning Surfaces and Fixtures Thoroughly
If you do not thoroughly clean your bathroom surfaces and fixtures, using proper cleaning sprays can lead to the buildup of bacteria, mold, and dirt that can cause damage to your surfaces and fixtures over time.
That can also lead to an unhealthy environment in your bathroom, as unclean surfaces and fixtures can attract bacteria and other germs.
The best way to clean surfaces in your bathroom is to use a multipurpose cleaner and a clean microfiber cloth.
Spray the cleaner on the surface, then use the cloth to scrub away any dirt, grime, or debris. Afterward, you can use a paper towel to wipe down the surface.
4. Not Deep-Cleaning the Toilet
If you don’t deep clean your bathroom toilet, bacteria, mold, and dirt will accumulate. These nasty particles harm your health and can cause permanent staining to your toilet and other bathroom fixtures.
In the worst-case scenario, the lack of deep cleaning can cause plumbing problems that can be expensive to repair.
The best way to clean your bathroom toilet is to use a quality cleaning solution designed specifically for toilets. Make sure to read the instructions and safety warnings before using.
Begin by pouring the solution into the toilet bowl and letting it sit for fifteen minutes for a deep clean. Scrub the bottom and side of the bowl with a stiff-bristled brush. Finally, flush the toilet to finish off the cleaning process.
5. Not Cleaning the Shower
When you don’t clean your shower, germs, and bacteria will accumulate. Not only can this be a health hazard, but it can also lead to permanent surface damage and discoloration.
Regularly using a powerful cleaning and sanitation product is the best way to clean your shower. A combination of scrubbing, rinsing, and drying will help to keep the area clean and free from germs and bacteria.
Additionally, a mildew cleaner should be used occasionally to prevent mold and mildew.
6. Not Cleaning the Bathtub
When you don’t clean your bathtub, it will eventually become grimy and covered in soap scum and bacteria, causing health concerns and making it harder to clean.
To clean a bathtub properly, first, gather supplies. You’ll need a bathtub cleaner, scrub brush, sponges, gloves, and a non-abrasive cloth.
Spray the entire bathtub with your cleaner of choice and let it sit for at least five minutes. After, scrub the bathtub with your scrub brush. Use a sponge to clean harder-to-reach areas or any stains.
Respray the tub with your cleaner, rinse with hot water, and dry with a non-abrasive cloth. Empty and refill the bathtub with hot water to ensure you don’t leave residue cleaner in the tub.
Clean the surrounding area of the tub and the surfaces that may have been exposed to the cleaner. Finally, use a towel to dry and polish the tub once you are finished.
7. Not Maintaining Floor Tiles
If you don’t clean and maintain your bathroom floor tiles, dirt, and grime will build up over time, leading to discoloration and staining.
That will not only make the bathroom look and feel unpleasant, but it can also lead to mold and mildew buildup, creating unhealthy conditions.
When cleaning bathroom floors, regularly sweep, mop, and scrub them with a mild cleaning solution. A sealer is also essential to protect the tiles and keep dirt and moisture from seeping in.
Lastly, thoroughly dry the tiles after cleaning to prevent watermarks.
8. Not Cleaning the Shower Curtain
If you don’t clean your shower curtain, it can get covered in mildew, mold, and soap scum. The best way to clean it is to take it down and wash it in hot, soapy water and then rinse it off before putting it back up.
You can also mix a solution of half vinegar and half water, spray it onto the curtain, leave it for a few minutes, and then rinse it.
Avoid These Bathroom Cleaning Errors
In this article, we have discussed eight common bathroom cleaning errors and how to avoid them. You can keep your bathroom clean and hygienic with the proper cleaning tools and a regular cleaning schedule.
Proper maintenance of floor tiles, fixtures, and surfaces and detailed cleaning are all essential factors in having and maintaining a clean bathroom environment.
For a professional cleaning standard for your bathroom and the rest of your home, contact our team for a quote for our cleaning services.